Message MarketDataRequest

Some systems allow the transmission of real-time quote, order, trade, trade volume, open interest, and/or other price information on a subscription basis. A Market Data Request is a general request for market data on specific securities or forex quotes.

	Field or Component	Field Name	FIXML name	Req'd	Comments	Depr.

8	BeginString		FIX.4.4 (Always unencrypted, must be first field in message)
9	BodyLength		(Always unencrypted, must be second field in message)
35	MsgType		(Always unencrypted, must be third field in message)
49	SenderCompID	@SID	(Always unencrypted)
56	TargetCompID	@TID	(Always unencrypted)
115	OnBehalfOfCompID	@OBID	Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)
128	DeliverToCompID	@D2ID	Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)
90	SecureDataLen		Required to identify length of encrypted section of message. (Always unencrypted)
91	SecureData		Required when message body is encrypted. Always immediately follows SecureDataLen field.
34	MsgSeqNum	@SeqNum	(Can be embedded within encrypted data section.)
50	SenderSubID	@SSub	(Can be embedded within encrypted data section.)
142	SenderLocationID	@SLoc	Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)
57	TargetSubID	@TSub	"ADMIN" reserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.)
143	TargetLocationID	@TLoc	Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)
116	OnBehalfOfSubID	@OBSub	Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)
144	OnBehalfOfLocationID	@OBLoc	Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)
129	DeliverToSubID	@D2Sub	Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)
145	DeliverToLocationID	@D2Loc	Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)
43	PossDupFlag	@PosDup	Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.)
97	PossResend	@PosRsnd	Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.)
52	SendingTime	@Snt	(Can be embedded within encrypted data section.)
122	OrigSendingTime	@OrigSnt	Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.)
212	XmlDataLen		Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.)
213	XmlData		Can contain a XML formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Volume 1: FIXML Support
347	MessageEncoding	@MsgEncd	Type of message encoding (non-ASCII characters) used in a message’s "Encoded" fields. Required if any "Encoding" fields are used.
369	LastMsgSeqNumProcessed		The last MsgSeqNum value received by the FIX engine and processed by downstream application, such as trading system or order routing system. Can be specified on every message sent. Useful for detecting a backlog with a counterparty.

Component

Hop

Hop

Number of repeating groups of historical "hop" information. Only applicable if OnBehalfOfCompID is used, however, its use is optional. Note that some market regulations or counterparties may require tracking of message hops.

end Component

Repeating Group 267

NoMDEntryTypes

@NoMDEntryTyps

269

MDEntryType

@Typ

end Repeating Group

end Component

Repeating Group 146

NoRelatedSym

@NoReltdSym

Component

Instrument

Instrmt

55	Symbol	@Sym	Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles) Use "[N/A]" for products which do not have a symbol.
65	SymbolSfx	@Sfx	Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.
48	SecurityID	@ID	Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.
22	SecurityIDSource	@Src	Required if SecurityID is specified.

Component

SecAltIDGrp

AID

Number of alternate Security Identifiers

460	Product	@Prod	Indicates the type of product the security is associated with (high-level category)
461	CFICode	@CFI	Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.
167	SecurityType	@SecTyp	It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments. Required for Fixed Income. Refer to Volume 7 - Fixed Income Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)
762	SecuritySubType	@SubTyp	Sub-type qualification/identification of the SecurityType (e.g. for SecurityType="MLEG"). If specified, SecurityType is required.
200	MaturityMonthYear	@MMY	Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S&P futures). Note MaturityDate (a full date) can also be specified.
541	MaturityDate	@MatDt	Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S&P futures).may use MaturityMonthYear and/or this field. When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment.
201	PutOrCall		For Options.
224	CouponPaymentDate	@CpnPmt	Date interest is to be paid. Used in identifying Corporate Bond issues.
225	IssueDate	@Issued	Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.
239	RepoCollateralSecurityType	@RepoCollSecTyp	(Deprecated, use UnderlyingSecurityType (310) )
226	RepurchaseTerm	@RepoTrm	(Deprecated, use TerminationType (788) )
227	RepurchaseRate	@RepoRt	(Deprecated, use Price (44) )
228	Factor	@Fctr	For Fixed Income: Amortization Factor for deriving Current face from Original face for ABS or MBS securities, note the fraction may be greater than, equal to or less than 1. In TIPS securities this is the Inflation index. Qty * Factor * Price = Gross Trade Amount For Derivatives: Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract. (Qty * Price) * Factor = Nominal Value
255	CreditRating	@CrdRtg
543	InstrRegistry	@Rgstry	The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.
470	CountryOfIssue	@IssuCtry	ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.
471	StateOrProvinceOfIssue	@StPrv	A two-character state or province abbreviation.
472	LocaleOfIssue	@Lcl	The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).
240	RedemptionDate	@Redeem	(Deprecated, use YieldRedemptionDate (696) in <YieldData> component block)
202	StrikePrice	@Strk	Used for derivatives, such as options and covered warrants
947	StrikeCurrency	@StrkCcy	Used for derivatives
206	OptAttribute	@OptAt	Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.
231	ContractMultiplier	@Mult	For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.
223	CouponRate	@CpnRt	For Fixed Income.
207	SecurityExchange	@Exch	Can be used to identify the security.
106	Issuer	@Issr
348	EncodedIssuerLen	@EncIssrLen	Must be set if EncodedIssuer field is specified and must immediately precede it.
349	EncodedIssuer	@EncIssr	Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.
107	SecurityDesc	@Desc
350	EncodedSecurityDescLen	@EncSecDescLen	Must be set if EncodedSecurityDesc field is specified and must immediately precede it.
351	EncodedSecurityDesc	@EncSecDesc	Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.
691	Pool	@Pool	Identifies MBS / ABS pool
667	ContractSettlMonth	@CSetMo	Must be present for MBS/TBA
875	CPProgram	@CPPgm	The program under which a commercial paper is issued
876	CPRegType	@CPRegT	The registration type of a commercial paper issuance

Component

EvntGrp

Evnt

Number of repeating EventType group entries.

	873	DatedDate	@Dated		If different from IssueDate
	874	InterestAccrualDate	@IntAcrl		If different from IssueDate and DatedDate

end Component

Component

UndInstrmtGrp

Undly

Component

InstrmtLegGrp

Leg

end Repeating Group

end Component

628	HopCompID	@ID
629	HopSendingTime	@Snt
630	HopRefID	@Ref

262	MDReqID	@ReqID	Must be unique, or the ID of previous Market Data Request to disable if SubscriptionRequestType = Disable previous Snapshot + Updates Request (2).
263	SubscriptionRequestType	@SubReqTyp	SubcriptionRequestType indicates to the other party what type of response is expected. A snapshot request only asks for current information. A subscribe request asks for updates as the status changes. Unsubscribe will cancel any future update messages from the counter party.
264	MarketDepth	@MktDepth
265	MDUpdateType	@UpdtTyp	Required if SubscriptionRequestType = Snapshot + Updates (1).
266	AggregatedBook	@AggBook
286	OpenCloseSettlFlag	@OpenClsSettlFlag	Can be used to clarify a request if MDEntryType = Opening Price(4), Closing Price(5), or Settlement Price(6).
546	Scope	@Scope	Defines the scope(s) of the request
547	MDImplicitDelete	@ImplctDel	Can be used when MarketDepth >= 2 and MDUpdateType = Incremental Refresh(1).

	455	SecurityAltID	@AltID
	456	SecurityAltIDSource	@AltIDSrc

865	EventType	@EventTyp
866	EventDate	@Dt
867	EventPx	@Px
868	EventText	@Txt

311	UnderlyingSymbol	@Sym
312	UnderlyingSymbolSfx	@Sfx
309	UnderlyingSecurityID	@ID
305	UnderlyingSecurityIDSource	@Src

FIX.4.4 Message

MarketDataRequest [type 'V']

<MktDataReq>

	458	UnderlyingSecurityAltID	@AltID
	459	UnderlyingSecurityAltIDSource	@AltIDSrc

462	UnderlyingProduct	@Prod
463	UnderlyingCFICode	@CFI
310	UnderlyingSecurityType	@Typ
763	UnderlyingSecuritySubType	@SubTyp
313	UnderlyingMaturityMonthYear	@MMY
542	UnderlyingMaturityDate	@Mat
315	UnderlyingPutOrCall
241	UnderlyingCouponPaymentDate	@CpnPmt
242	UnderlyingIssueDate	@Issued
243	UnderlyingRepoCollateralSecurityType	@RepoCollSecTyp	(Deprecated, not applicable/used for Repos)
244	UnderlyingRepurchaseTerm	@RepoTrm	(Deprecated, not applicable/used for Repos)
245	UnderlyingRepurchaseRate	@RepoRt	(Deprecated, not applicable/used for Repos)
246	UnderlyingFactor	@Fctr
256	UnderlyingCreditRating	@CrdRtg
595	UnderlyingInstrRegistry	@Rgstry
592	UnderlyingCountryOfIssue	@Ctry
593	UnderlyingStateOrProvinceOfIssue	@StOrProvnc
594	UnderlyingLocaleOfIssue	@Lcl
247	UnderlyingRedemptionDate	@Redeem	(Deprecated, use YieldRedemptionDate (696) in <YieldData> component block)
316	UnderlyingStrikePrice	@StrkPx
941	UnderlyingStrikeCurrency	@StrkCcy
317	UnderlyingOptAttribute	@OptA
436	UnderlyingContractMultiplier	@Mult
435	UnderlyingCouponRate	@CpnRt
308	UnderlyingSecurityExchange	@Exch
306	UnderlyingIssuer	@Issr
362	EncodedUnderlyingIssuerLen	@EncUndIssrLen
363	EncodedUnderlyingIssuer	@EncUndIssr
307	UnderlyingSecurityDesc	@Desc
364	EncodedUnderlyingSecurityDescLen	@EncUndSecDescLen
365	EncodedUnderlyingSecurityDesc	@EncUndSecDesc
877	UnderlyingCPProgram	@CPPgm
878	UnderlyingCPRegType	@CPRegTyp
318	UnderlyingCurrency	@Ccy	Specific to the <UnderlyingInstrument> (not in <Instrument>)
879	UnderlyingQty	@Qty	Specific to the <UnderlyingInstrument> (not in <Instrument>) Unit amount of the underlying security (par, shares, currency, etc.)
810	UnderlyingPx	@Px	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal clean price (percent-of-par or per unit) of the underlying security or basket.
882	UnderlyingDirtyPrice	@DirtPx	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket. "Dirty" means it includes accrued interest
883	UnderlyingEndPrice	@EndPx	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket at the end of the agreement.
884	UnderlyingStartValue	@StartVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the start of the agreement
885	UnderlyingCurrentValue	@CurVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value currently attributed to this collateral
886	UnderlyingEndValue	@EndVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the end of the agreement

	888	UnderlyingStipType	@Typ		Required if NoUnderlyingStips >0
	889	UnderlyingStipValue	@Val

600	LegSymbol	@Sym
601	LegSymbolSfx	@Sfx
602	LegSecurityID	@ID
603	LegSecurityIDSource	@Src

	605	LegSecurityAltID	@SecAltID
	606	LegSecurityAltIDSource	@SecAltIDSrc

607	LegProduct	@Prod
608	LegCFICode	@CFI
609	LegSecurityType	@SecTyp
764	LegSecuritySubType	@SecSubTyp
610	LegMaturityMonthYear	@MMY
611	LegMaturityDate	@Mat
248	LegCouponPaymentDate	@CpnPmt
249	LegIssueDate	@Issued
250	LegRepoCollateralSecurityType	@RepoCollSecTyp	(Deprecated, not applicable/used for Repos)
251	LegRepurchaseTerm	@RepoTrm	(Deprecated, not applicable/used for Repos)
252	LegRepurchaseRate	@RepoRt	(Deprecated, not applicable/used for Repos)
253	LegFactor	@Fctr
257	LegCreditRating	@CrdRtg
599	LegInstrRegistry	@Rgstry
596	LegCountryOfIssue	@Ctry
597	LegStateOrProvinceOfIssue	@StOrProvnc
598	LegLocaleOfIssue	@Lcl
254	LegRedemptionDate	@Redeem	(Deprecated, use YieldRedemptionDate (696) in <YieldData> component block)
612	LegStrikePrice	@Strk
942	LegStrikeCurrency	@StrkCcy
613	LegOptAttribute	@OptA
614	LegContractMultiplier	@Cmult
615	LegCouponRate	@CpnRt
616	LegSecurityExchange	@Exch
617	LegIssuer	@Issr
618	EncodedLegIssuerLen	@EncLegIssrLen
619	EncodedLegIssuer	@EncLegIssr
620	LegSecurityDesc	@Desc
621	EncodedLegSecurityDescLen	@EncLegSecDescLen
622	EncodedLegSecurityDesc	@EncLegSecDesc
623	LegRatioQty	@RatioQty	Specific to the <InstrumentLeg> (not in <Instrument>)
624	LegSide	@Side	Specific to the <InstrumentLeg> (not in <Instrument>)
556	LegCurrency	@Ccy	Specific to the <InstrumentLeg> (not in <Instrument>)
740	LegPool	@Pool	Identifies MBS / ABS pool
739	LegDatedDate	@Dated
955	LegContractSettlMonth	@CSetMo
956	LegInterestAccrualDate	@IntAcrl

	815	ApplQueueAction	@ApplQuActn		Action to take if application level queuing exists
	812	ApplQueueMax	@ApplQuMax		Maximum application queue depth that must be exceeded before queuing action is taken.

93	SignatureLength	Required when trailer contains signature. Note: Not to be included within SecureData field
89	Signature	Note: Not to be included within SecureData field
10	CheckSum	(Always unencrypted, always last field in message)