Repeating group of RootParty sub-identifiers.

Sub-identifier (e.g. Clearing Acct for PartyID=Clearing Firm) if applicable. Required if

NoRootPartySubIDs > 0.

Type of Sub-identifier. Required if NoRootPartySubIDs > 0.

Repeating group below should contain unique combinations of PartyID, PartyIDSource, and PartyRole

Used to identify source of PartyID. Required if PartyIDSource is specified. Required if NoPartyIDs > 0.

Used to identify class source of PartyID value (e.g. BIC). Required if PartyID is specified. Required if NoPartyIDs > 0.

Identifies the type of PartyID (e.g. Executing Broker). Required if NoPartyIDs > 0.

Repeating group of Party sub-identifiers.

Number of repeating groups for pre-trade allocation

Required if NoAllocs > 0. Must be first field in repeating group.

Insert here the set of "Nested Parties" (firm identification "nested" within additional repeating group) fields defined in "Common Components of Application Messages"

Used for NestedPartyRole=Clearing Firm

Required when DisplayMethod = 3

Required when DisplayMethod = 3

Can be used to specify larger increments than the standard increment provided by the market. Optionally used when DisplayMethod = 3

Required when DisplayMethod = 2

Specifies the number of repeating TradingSessionIDs

Required if NoTradingSessions is > 0.

Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles)

Use "[N/A]" for products which do not have a symbol.

Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.

Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.

Required if SecurityID is specified.

Number of alternate Security Identifiers

Indicates the type of product the security is associated with (high-level category)

Identifies an entire suite of products for a given market. In Futures this may be "interest rates", "agricultural", "equity indexes", etc

An exchange specific name assigned to a group of related securities which may be concurrently affected by market events and actions.

Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.

It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.

Required for Fixed Income. Refer to Volume 7 - Fixed Income

Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)

Sub-type qualification/identification of the SecurityType (e.g. for SecurityType="MLEG"). If specified, SecurityType is required.

Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S&P futures). Note MaturityDate (a full date) can also be specified.

Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S&P futures).may use MaturityMonthYear and/or this field.

When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment.

For NDFs this represents the fixing date of the contract.

For NDFs this represents the fixing time of the contract. It is optional to specify the fixing time.

Indicator to determine if Instrument is Settle on Open.

Gives the current state of the instrument

Date interest is to be paid. Used in identifying Corporate Bond issues.

Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.

For Fixed Income: Amortization Factor for deriving Current face from Original face for ABS or MBS securities, note the fraction may be greater than, equal to or less than 1. In TIPS securities this is the Inflation index.

Qty * Factor * Price = Gross Trade Amount

For Derivatives: Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract.

(Qty * Price) * Factor = Nominal Value

The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.

ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.

A two-character state or province abbreviation.

The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).

Used for derivatives, such as options and covered warrants

Used for derivatives

Used for derivatives. Multiplier applied to the strike price for the purpose of calculating the settlement value.

Used for derivatives. The number of shares/units for the financial instrument involved in the option trade.

Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.

For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.

Minimum price increment for the instrument. Could also be used to represent tick value.

Minimum price increment amount associated with the MinPriceIncrement [969]. For listed derivatives, the value can be calculated by multiplying MinPriceIncrement by ContractValueFactor [231]

0

Settlement method for a contract. Can be used as an alternative to CFI Code value

Type of exercise of a derivatives security

Cash amount indicating the pay out associated with an option. For binary options this is a fixed amount

Method for price quotation

Indicates type of valuation method used.

Indicates whether the instruments are pre-listed only or can also be defined via user request

Used to express the ceiling price of a capped call

Used to express the floor price of a capped put

Used to express option right

Used to indicate if a security has been defined as flexible according to "non-standard" means. Analog to CFICode Standard/Non-standard indicator

Used to indicate if a product or group of product supports the creation of flexible securities

Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

For Fixed Income.

Can be used to identify the security.

Position Limit for the instrument.

Near-term Position Limit for the instrument.

Must be set if EncodedIssuer field is specified and must immediately precede it.

Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.

Must be set if EncodedSecurityDesc field is specified and must immediately precede it.

Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.

Embedded XML document describing security.

Identifies MBS / ABS pool

Must be present for MBS/TBA

The program under which a commercial paper is issued

The registration type of a commercial paper issuance

Number of repeating EventType group entries.

If different from IssueDate

If different from IssueDate and DatedDate

Used to identify the parties listing a specific instrument

Number of underlyings

Must be provided if Number of underlyings > 0

Required if NoStipulations >0

One of CashOrderQty, OrderQty, or (for CIV only) OrderPercent is required. Note that unless otherwise specified, only one of CashOrderQty, OrderQty, or OrderPercent should be specified.

One of CashOrderQty, OrderQty, or (for CIV only) OrderPercent is required. Note that unless otherwise specified, only one of CashOrderQty, OrderQty, or OrderPercent should be specified. Specifies the approximate "monetary quantity" for the order. Broker is responsible for converting and calculating OrderQty in tradeable units (e.g. shares) for subsequent messages.

For CIV - Optional. One of CashOrderQty, OrderQty or (for CIV only) OrderPercent is required. Note that unless otherwise specified, only one of CashOrderQty, OrderQty, or OrderPercent should be specified.

For CIV - Optional

For CIV - Optional

Required if any other Triggering tags are specified.

Only relevant and required for TriggerAction = 1

Only relevant and required for TriggerAction = 1

Requires TriggerSecurityIDSource if specified. Only relevant and required for TriggerAction = 1

Requires TriggerSecurityIDSource if specified. Only relevant and required for TriggerAction = 1

Only relevant for TriggerAction = 1

Only relevant for TriggerAction = 1

Only relevant for TriggerAction = 1

Should be specified if the order changes Price.

Should be specified if the order changes type.

Required if the order should change quantity

Only relevant and required for TriggerType = 2.

Requires TriggerTradingSessionID if specified. Relevant for TriggerType = 2 only.

For Fixed Income

Must be present if BenchmarkPrice is used.

The identifier of the benchmark security, e.g. Treasury against Corporate bond.

Source of BenchmarkSecurityID. If not specified, then ID Source is understood to be the same as that in the Instrument block.

Amount (signed) added to the peg for a pegged order in the context of the PegOffsetType

Defines the type of peg.

Describes whether peg is static/fixed or floats

Type of Peg Offset (e.g. price offset, tick offset etc)

Specifies nature of resulting pegged price (e.g. or better limit, strict limit etc)

If the calculated peg price is not a valid tick price, specifies how to round the price (e.g. be more or less aggressive)

The scope of the "related to" price of the peg (e.g. local, global etc)

Required if PegSecurityID is specified.

Requires PegSecurityIDSource if specified.

What the discretionary price is related to (e.g. primary price, display price etc)

Amount (signed) added to the "related to" price specified via DiscretionInst, in the context of DiscretionOffsetType

Describes whether discretion price is static/fixed or floats

Type of Discretion Offset (e.g. price offset, tick offset etc)

Specifies the nature of the resulting discretion price (e.g. or better limit, strict limit etc)

If the calculated discretion price is not a valid tick price, specifies how to round the price (e.g. to be more or less aggressive)

The scope of "related to" price of the discretion (e.g. local, global etc)

Indicates number of strategy parameters

Name of parameter

Datatype of the parameter.

Value of the parameter