Message AllocationReport

	Field or Component	Field Name	FIXML name	Req'd	Comments	Depr.

8	BeginString		FIXT.1.1 (Always unencrypted, must be first field in message)
9	BodyLength		(Always unencrypted, must be second field in message)
35	MsgType	@MsgTyp	(Always unencrypted, must be third field in message)
1128	ApplVerID	@ApplVerID	Indicates application version using a service pack identifier. The ApplVerID applies to a specific message occurrence.
1156	ApplExtID
1129	CstmApplVerID		Used to support bilaterally agreed custom functionality
49	SenderCompID	@SID	(Always unencrypted)
56	TargetCompID	@TID	(Always unencrypted)
115	OnBehalfOfCompID	@OBID	Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)
128	DeliverToCompID	@D2ID	Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)
90	SecureDataLen		Required to identify length of encrypted section of message. (Always unencrypted)
91	SecureData		Required when message body is encrypted. Always immediately follows SecureDataLen field.
34	MsgSeqNum	@SeqNum	(Can be embedded within encrypted data section.)
50	SenderSubID	@SSub	(Can be embedded within encrypted data section.)
142	SenderLocationID	@SLoc	Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)
57	TargetSubID	@TSub	"ADMIN" reserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.)
143	TargetLocationID	@TLoc	Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)
116	OnBehalfOfSubID	@OBSub	Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)
144	OnBehalfOfLocationID	@OBLoc	Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)
129	DeliverToSubID	@D2Sub	Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)
145	DeliverToLocationID	@D2Loc	Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)
43	PossDupFlag	@PosDup	Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.)
97	PossResend	@PosRsnd	Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.)
52	SendingTime	@Snt	(Can be embedded within encrypted data section.)
122	OrigSendingTime	@OrigSnt	Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.)
212	XmlDataLen		Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.)
213	XmlData		Can contain a XML formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Volume 1: FIXML Support
347	MessageEncoding	@MsgEncd	Type of message encoding (non-ASCII characters) used in a message's "Encoded" fields. Required if any "Encoding" fields are used.
369	LastMsgSeqNumProcessed		The last MsgSeqNum value received by the FIX engine and processed by downstream application, such as trading system or order routing system. Can be specified on every message sent. Useful for detecting a backlog with a counterparty.

Component

HopGrp

Hop

Number of repeating groups of historical "hop" information. Only applicable if OnBehalfOfCompID is used, however, its use is optional. Note that some market regulations or counterparties may require tracking of message hops.

end Component

Repeating Group 73

NoOrders

Indicates number of orders to be combined for allocation. If order(s) were manually delivered set to 1 (one).Required when AllocNoOrdersType = 1

11	ClOrdID	@ClOrdID	Order identifier assigned by client if order(s) were electronically delivered over FIX (or otherwise assigned a ClOrdID) and executed. If order(s) were manually delivered (or otherwise not delivered over FIX) this field should contain string "MANUAL". Note where an order has undergone one or more cancel/replaces, this should be the ClOrdID of the most recent version of the order. Required when NoOrders(73) > 0 and must be the first repeating field in the group.
37	OrderID	@OrdID
198	SecondaryOrderID	@OrdID2	Can be used to provide order id used by exchange or executing system.
526	SecondaryClOrdID	@ClOrdID2
66	ListID	@ListID	Required for List Orders.

Component

NestedParties2

Pty

Insert here the set of "NestedParties2" fields defined in "Common Components of Application Messages"

This is used to identify the executing broker for step in/give in trades

@Qty

@AvgPx

Average price for this order.

For FX, if specified, expressed in terms of Currency(15).

800

OrderBookingQty

@BkngQty

Quantity of this order that is being booked out by this message (will be equal to or less than this order's OrderQty)

Note that the sum of the OrderBookingQty values in this repeating group must equal the total quantity being allocated (in Quantity (53) field)

end Repeating Group

end Component

Repeating Group 124

NoExecs

Indicates number of individual execution repeating group entries to follow. Absence of this field indicates that no individual execution entries are included. Primarily used to support step-outs.

32	LastQty	@LastQty	Amount of quantity (e.g. number of shares) in individual execution. Required if NoExecs > 0
17	ExecID	@ExecID
527	SecondaryExecID	@ExecID2
31	LastPx	@LastPx	Price of individual execution. Required if NoExecs > 0. For FX, if specified, expressed in terms of Currency(15).
669	LastParPx	@LastParPx	Last price expressed in percent-of-par. Conditionally required for Fixed Income trades when LastPx is expressed in Yield, Spread, Discount or any other price type
29	LastCapacity	@LastCpcty	Used to identify whether the trade was executed on an agency or principal basis.
1003	TradeID	@TrdID
1041	FirmTradeID	@FirmTrdID

end Repeating Group

end Component

55	Symbol	@Sym	Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles) Use "[N/A]" for products which do not have a symbol.
65	SymbolSfx	@Sfx	Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.
48	SecurityID	@ID	Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.
22	SecurityIDSource	@Src	Required if SecurityID is specified.

Component

SecAltIDGrp

AID

Number of alternate Security Identifiers

460	Product	@Prod	Indicates the type of product the security is associated with (high-level category)
1227	ProductComplex	@ProdCmplx	Identifies an entire suite of products for a given market. In Futures this may be "interest rates", "agricultural", "equity indexes", etc
1151	SecurityGroup	@SecGrp	An exchange specific name assigned to a group of related securities which may be concurrently affected by market events and actions.
461	CFICode	@CFI	Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.
167	SecurityType	@SecTyp	It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments. Required for Fixed Income. Refer to Volume 7 - Fixed Income Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)
762	SecuritySubType	@SubTyp	Sub-type qualification/identification of the SecurityType (e.g. for SecurityType="MLEG"). If specified, SecurityType is required.
200	MaturityMonthYear	@MMY	Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S&P futures). Note MaturityDate (a full date) can also be specified.
541	MaturityDate	@MatDt	Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S&P futures).may use MaturityMonthYear and/or this field. When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment. For NDFs this represents the fixing date of the contract.
1079	MaturityTime	@MatTm	For NDFs this represents the fixing time of the contract. It is optional to specify the fixing time.
966	SettleOnOpenFlag	@SettlOnOpenFlag	Indicator to determine if Instrument is Settle on Open.
1049	InstrmtAssignmentMethod	@AsgnMeth
965	SecurityStatus	@Status	Gives the current state of the instrument
224	CouponPaymentDate	@CpnPmt	Date interest is to be paid. Used in identifying Corporate Bond issues.
1449	RestructuringType	@RestrctTyp
1450	Seniority	@Snrty
1451	NotionalPercentageOutstanding	@NotlPctOut
1452	OriginalNotionalPercentageOutstanding	@OrigNotlPctOut
1457	AttachmentPoint	@AttchPnt
1458	DetachmentPoint	@DetchPnt
225	IssueDate	@Issued	Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.
239	RepoCollateralSecurityType	@RepoCollSecTyp		Depr FIX.4.4
226	RepurchaseTerm	@RepoTrm		Depr FIX.4.4
227	RepurchaseRate	@RepoRt		Depr FIX.4.4
228	Factor	@Fctr	For Fixed Income: Amortization Factor for deriving Current face from Original face for ABS or MBS securities, note the fraction may be greater than, equal to or less than 1. In TIPS securities this is the Inflation index. Qty * Factor * Price = Gross Trade Amount For Derivatives: Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract. (Qty * Price) * Factor = Nominal Value
255	CreditRating	@CrdRtg
543	InstrRegistry	@Rgstry	The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.
470	CountryOfIssue	@IssuCtry	ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.
471	StateOrProvinceOfIssue	@StPrv	A two-character state or province abbreviation.
472	LocaleOfIssue	@Lcl	The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).
240	RedemptionDate	@Redeem		Depr FIX.4.4
202	StrikePrice	@StrkPx	Used for derivatives, such as options and covered warrants
947	StrikeCurrency	@StrkCcy	Used for derivatives
967	StrikeMultiplier	@StrkMult	Used for derivatives. Multiplier applied to the strike price for the purpose of calculating the settlement value.
968	StrikeValue	@StrkValu	Used for derivatives. The number of shares/units for the financial instrument involved in the option trade.
1478	StrikePriceDeterminationMethod	@StrkPxDtrmnMeth
1479	StrikePriceBoundaryMethod	@StrkPxBndryMeth
1480	StrikePriceBoundaryPrecision	@StrkPxBndryPrcsn
1481	UnderlyingPriceDeterminationMethod	@PxDtrmnMeth
206	OptAttribute	@OptAt	Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.
231	ContractMultiplier	@Mult	For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.
1435	ContractMultiplierUnit	@MultTyp
1439	FlowScheduleType	@FlowSchedTyp
969	MinPriceIncrement	@MinPxIncr	Minimum price increment for the instrument. Could also be used to represent tick value.
1146	MinPriceIncrementAmount	@MinPxIncrAmt	Minimum price increment amount associated with the MinPriceIncrement [969]. For listed derivatives, the value can be calculated by multiplying MinPriceIncrement by ContractValueFactor [231]
996	UnitOfMeasure	@UOM	0
1147	UnitOfMeasureQty	@UOMQty
1191	PriceUnitOfMeasure	@PxUOM
1192	PriceUnitOfMeasureQty	@PxUOMQty
1193	SettlMethod	@SettlMeth	Settlement method for a contract. Can be used as an alternative to CFI Code value
1194	ExerciseStyle	@ExerStyle	Type of exercise of a derivatives security
1482	OptPayoutType	@OptPayoutTyp
1195	OptPayoutAmount	@OptPayAmt	Cash amount indicating the pay out associated with an option. For binary options this is a fixed amount
1196	PriceQuoteMethod	@PxQteMeth	Method for price quotation
1197	ValuationMethod	@ValMeth	Indicates type of valuation method used.
1198	ListMethod	@ListMeth	Indicates whether the instruments are pre-listed only or can also be defined via user request
1199	CapPrice	@CapPx	Used to express the ceiling price of a capped call
1200	FloorPrice	@FlrPx	Used to express the floor price of a capped put
201	PutOrCall	@PutCall	Used to express option right
1244	FlexibleIndicator	@FlexInd	Used to indicate if a security has been defined as flexible according to "non-standard" means. Analog to CFICode Standard/Non-standard indicator
1242	FlexProductEligibilityIndicator	@FlexProdElig	Used to indicate if a product or group of product supports the creation of flexible securities
997	TimeUnit	@TmUnit	Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)
223	CouponRate	@CpnRt	For Fixed Income.
207	SecurityExchange	@Exch	Can be used to identify the security.
970	PositionLimit	@PosLmt	Position Limit for the instrument.
971	NTPositionLimit	@NTPosLmt	Near-term Position Limit for the instrument.
106	Issuer	@Issr
348	EncodedIssuerLen	@EncIssrLen	Must be set if EncodedIssuer field is specified and must immediately precede it.
349	EncodedIssuer	@EncIssr	Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.
107	SecurityDesc	@Desc
350	EncodedSecurityDescLen	@EncSecDescLen	Must be set if EncodedSecurityDesc field is specified and must immediately precede it.
351	EncodedSecurityDesc	@EncSecDesc	Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.

Component

SecurityXML

SecXML

Embedded XML document describing security.

691	Pool	@Pool	Identifies MBS / ABS pool
667	ContractSettlMonth	@CSetMo	Must be present for MBS/TBA
875	CPProgram	@CPPgm	The program under which a commercial paper is issued
876	CPRegType	@CPRegT	The registration type of a commercial paper issuance

Component

EvntGrp

Evnt

Number of repeating EventType group entries.

	873	DatedDate	@Dated		If different from IssueDate
	874	InterestAccrualDate	@IntAcrl		If different from IssueDate and DatedDate

Component

InstrumentParties

Pty

Used to identify the parties listing a specific instrument

Component

ComplexEvents

CmplxEvnt

end Component

	668	DeliveryForm	@DlvryForm		Identifies the form of delivery.
	869	PctAtRisk	@PctAtRisk		Percent at risk due to lowest possible call.

Component

AttrbGrp

Attrb

Number of repeating InstrAttrib group entries.

end Component

913	AgreementDesc	@AgmtDesc	The full name of the base standard agreement, annexes and amendments in place between the principals and applicable to this deal
914	AgreementID	@AgmtID	A common reference to the applicable standing agreement between the principals
915	AgreementDate	@AgmtDt	A reference to the date the underlying agreement was executed.
918	AgreementCurrency	@AgmtCcy	Currency of the underlying agreement.
788	TerminationType	@TrmTyp	For Repos the timing or method for terminating the agreement.
916	StartDate	@StartDt	Settlement date of the beginning of the deal
917	EndDate	@EndDt	Repayment / repurchase date
919	DeliveryType	@DlvryTyp	Delivery or custody arrangement for the underlying securities
898	MarginRatio	@MgnRatio	Percentage of cash value that underlying security collateral must meet.

end Component

Repeating Group 711

NoUnderlyings

Number of underlyings

Component

UnderlyingInstrument

Undly

Must be provided if Number of underlyings > 0

end Repeating Group

end Component

Repeating Group 555

NoLegs

Number of legs

Component

InstrumentLeg

Leg

Must be provided if Number of legs > 0

end Repeating Group

end Component

218	Spread	@Spread	For Fixed Income
220	BenchmarkCurveCurrency	@Ccy
221	BenchmarkCurveName	@Name
222	BenchmarkCurvePoint	@Point
662	BenchmarkPrice	@Px
663	BenchmarkPriceType	@PxTyp	Must be present if BenchmarkPrice is used.
699	BenchmarkSecurityID	@SecID	The identifier of the benchmark security, e.g. Treasury against Corporate bond.
761	BenchmarkSecurityIDSource	@SecIDSrc	Source of BenchmarkSecurityID. If not specified, then ID Source is understood to be the same as that in the Instrument block.

end Component

Repeating Group 453

NoPartyIDs

Repeating group below should contain unique combinations of PartyID, PartyIDSource, and PartyRole

448	PartyID	@ID	Used to identify source of PartyID. Required if PartyIDSource is specified. Required if NoPartyIDs > 0.
447	PartyIDSource	@Src	Used to identify class source of PartyID value (e.g. BIC). Required if PartyID is specified. Required if NoPartyIDs > 0.
452	PartyRole	@R	Identifies the type of PartyID (e.g. Executing Broker). Required if NoPartyIDs > 0.

Component

PtysSubGrp

Sub

Repeating group of Party sub-identifiers.

end Repeating Group

end Component

Repeating Group 232

NoStipulations

	233	StipulationType	@Typ		Required if NoStipulations >0
	234	StipulationValue	@Val

end Repeating Group

end Component

235	YieldType	@Typ
236	Yield	@Yld
701	YieldCalcDate	@CalcDt
696	YieldRedemptionDate	@RedDt
697	YieldRedemptionPrice	@RedPx
698	YieldRedemptionPriceType	@RedPxTyp

end Component

Repeating Group 753

NoPosAmt

Number of Position Amount entries

707	PosAmtType	@Typ
708	PosAmt	@Amt
1055	PositionCurrency	@Ccy

end Repeating Group

end Component

Repeating Group 78

NoAllocs

Conditionally required except when AllocTransType = Cancel, or when AllocType = Ready-to-book or Warehouse instruction

79	AllocAccount	@Acct	May be the same value as BrokerOfCredit if ProcessCode is step-out or soft-dollar step-out and Institution does not wish to disclose individual account breakdowns to the ExecBroker. Required if NoAllocs > 0. Must be first field in repeating group. Conditionally required except when for AllocTransType="Cancel", or when AllocType= "Ready-To-Book" or "Warehouse instruction".
661	AllocAcctIDSource	@ActIDSrc
573	MatchStatus	@MtchStat
366	AllocPrice	@Px	Used when performing "executed price" vs. "average price" allocations (e.g. Japan). AllocAccount plus AllocPrice form a unique Allocs entry. Used in lieu of AllocAvgPx.
80	AllocQty	@Qty	Conditionally required except when for AllocTransType="Cancel", or when AllocType= "Ready-To-Book" or "Warehouse instruction".
467	IndividualAllocID	@IndAllocID
81	ProcessCode	@ProcCode
989	SecondaryIndividualAllocID	@IndAllocID2	Can be used by an intermediary to specify an allocation ID assigned by the intermediary's system.
1002	AllocMethod	@Meth	Specifies the method under which a trade quantity was allocated.
993	AllocCustomerCapacity	@CustCpcty	Can be used for granular reporting of separate allocation detail within a single trade report or allocation message.
1047	AllocPositionEffect	@AllocPosEfct
992	IndividualAllocType	@Typ

Component

NestedParties

Pty

Insert here the set of "Nested Parties" (firm identification "nested" within additional repeating group) fields defined in "Common Components of Application Messages"

Used for NestedPartyRole=BrokerOfCredit, ClientID, Settlement location (PSET), etc.

Note: this field can be used for settlement location (PSET) information.

208	NotifyBrokerOfCredit	@NotifyBrkrOfCredit
209	AllocHandlInst	@HandlInst
161	AllocText	@Txt	Free format text field related to this AllocAccount
360	EncodedAllocTextLen	@EncAllocTextLen	Must be set if EncodedAllocText field is specified and must immediately precede it.
361	EncodedAllocText	@EncAllocText	Encoded (non-ASCII characters) representation of the AllocText field in the encoded format specified via the MessageEncoding field.

Component

CommissionData

Comm

Insert here the set of "CommissionData" fields defined in "Common Components of Application Messages"

153	AllocAvgPx	@AvgPx	AvgPx for this AllocAccount. For F/X orders, should be the "all-in" rate (spot rate adjusted for forward points) for this allocation, expressed in terms of Currency(15). For Fixed Income always express value as "percent of par".
154	AllocNetMoney	@NetMny	NetMoney for this AllocAccount ((AllocQty * AllocAvgPx) - Commission - sum of MiscFeeAmt + AccruedInterestAmt) if a Sell. ((AllocQty * AllocAvgPx) + Commission + sum of MiscFeeAmt + AccruedInterestAmt) if a Buy. For FX, if specified, expressed in terms of Currency(15).
119	SettlCurrAmt	@SettlCurrAmt	Replaced by AllocSettlCurrAmt	Depr FIX.4.4
737	AllocSettlCurrAmt	@AllocSettlCurrAmt	AllocNetMoney in AllocSettlCurrency for this AllocAccount if AllocSettlCurrency is different from "overall" Currency
120	SettlCurrency	@SettlCcy	Replaced by AllocSettlCurrency SettlCurrency for this AllocAccount if different from "overall" Currency. Required if SettlCurrAmt is specified.	Depr FIX.4.4
736	AllocSettlCurrency	@AllocSettlCcy	AllocSettlCurrency for this AllocAccount if different from "overall" Currency. Required if AllocSettlCurrAmt is specified. Required for NDFs.
155	SettlCurrFxRate	@SettlCurrFxRt	Foreign exchange rate used to compute AllocSettlCurrAmt from Currency to AllocSettlCurrency
156	SettlCurrFxRateCalc	@SettlCurrFxRtCalc	Specifies whether the SettlCurrFxRate should be multiplied or divided
742	AllocAccruedInterestAmt	@AcrdIntAmt	Applicable for Convertible Bonds and fixed income
741	AllocInterestAtMaturity	@IntAtMat	Applicable for securities that pay interest in lump-sum at maturity

Component

MiscFeesGrp

MiscFees

Component

ClrInstGrp

ClrInst

@ClrFeeInd

@SettlInstTyp

Used to indicate whether settlement instructions are provided on this message, and if not, how they are to be derived.

Absence of this field implies use of default instructions.

Component

SettlInstructionsData

SetInstr

Insert here the set of "SettlInstructionsData" fields defined in "Common Components of Application Messages"

Used to communicate settlement instructions for this AllocAccount detail. Required if AllocSettlInstType = 2 or 3.

end Repeating Group

end Component

Repeating Group 1445

NoRateSources

1446	RateSource	@RtSrc	Required if NoRateSource(1445) > 0
1447	RateSourceType	@RtSrcTyp	Required if NoRateSources(1445) > 0
1448	ReferencePage	@RefPg	Required if RateSource(1446)=other

end Repeating Group

end Component

93	SignatureLength	Required when trailer contains signature. Note: Not to be included within SecureData field
89	Signature	Note: Not to be included within SecureData field
10	CheckSum	(Always unencrypted, always last field in message)

end Component

628	HopCompID	@ID
629	HopSendingTime	@Snt
630	HopRefID	@Ref

755	AllocReportID	@RptID	Unique identifier for this message
70	AllocID	@ID
71	AllocTransType	@TransTyp	i.e. New, Cancel, Replace
795	AllocReportRefID	@RptRefID	Required for AllocTransType = Replace or Cancel
796	AllocCancReplaceReason	@CxlRplcRsn	Required for AllocTransType = Replace or Cancel Gives the reason for replacing or cancelling the allocation report
793	SecondaryAllocID	@ID2	Optional second identifier for this allocation instruction (need not be unique)
794	AllocReportType	@RptTyp	Specifies the purpose or type of Allocation Report message
87	AllocStatus	@Stat
88	AllocRejCode	@RejCode	Required for AllocStatus = 1 (rejected)
72	RefAllocID	@RefID	Required for AllocTransType = Replace or Cancel
808	AllocIntermedReqType	@ImReqTyp	Required if AllocReportType = 8 (Request to Intermediary) Indicates status that is requested to be transmitted to counterparty by the intermediary (i.e. clearing house)
196	AllocLinkID	@LinkID	Can be used to link two different Allocation messages (each with unique AllocID) together, i.e. for F/X "Netting" or "Swaps"
197	AllocLinkType	@LinkTyp	Can be used to link two different Allocation messages and identifies the type of link. Required if AllocLinkID is specified.
466	BookingRefID	@BkngRefID
715	ClearingBusinessDate	@BizDt	Indicates Clearing Business Date for which transaction will be settled.
828	TrdType	@TrdTyp	Indicates Trade Type of Allocation.
829	TrdSubType	@TrdSubTyp	Indicates TradeSubType of Allocation. Necessary for defining groups.
442	MultiLegReportingType	@MLegRptTyp	Indicates MultiLegReportType of original trade marked for allocation.
582	CustOrderCapacity	@CustCpcty	Indicates CTI of original trade marked for allocation.
578	TradeInputSource	@InptSrc	Indicates input source of original trade marked for allocation.
991	RndPx	@RndPx	Specifies the rounded price to quoted precision.
1011	MessageEventSource	@MsgEvtSrc	Used to identify the event or source which gave rise to a message.
579	TradeInputDevice	@InptDev	Specific device number, terminal number or station where trade was entered
819	AvgPxIndicator	@AvgPxInd	Indicates if an allocation is to be average priced. Is also used to indicate if average price allocation group is complete or incomplete.
857	AllocNoOrdersType	@NoOrdsTyp	Indicates how the orders being booked and allocated by this message are identified, i.e. by explicit definition in the NoOrders group or not.

757	Nested2PartyID	@ID	Used to identify source of Nested2PartyID. Required if Nested2PartyIDSource is specified. Required if NoNested2PartyIDs > 0.
758	Nested2PartyIDSource	@Src	Used to identify class source of Nested2PartyID value (e.g. BIC). Required if Nested2PartyID is specified. Required if NoNested2PartyIDs > 0.
759	Nested2PartyRole	@R	Identifies the type of Nested2PartyID (e.g. Executing Broker). Required if NoNested2PartyIDs > 0.

	760	Nested2PartySubID	@ID
	807	Nested2PartySubIDType	@Typ

570	PreviouslyReported	@PrevlyRpted
700	ReversalIndicator	@ReversalInd
574	MatchType	@MtchTyp
54	Side	@Side

FIX.5.0SP2 Message

AllocationReport [type 'AS']

<AllocRpt>

1184	SecurityXMLLen		Must be set if SecurityXML field is specified and must immediately precede it.
1185	SecurityXML		XML payload or content describing the Security information.
1186	SecurityXMLSchema	@Schema	XML Schema used to validate the XML used to describe the Security.

865	EventType	@EventTyp
866	EventDate	@Dt
1145	EventTime	@Tm	Specific time of event. To be used in combination with EventDate [866]
867	EventPx	@Px
868	EventText	@Txt

1019	InstrumentPartyID	@ID	Used to identify party id related to instrument
1050	InstrumentPartyIDSource	@Src	Used to identify source of instrument party id
1051	InstrumentPartyRole	@R	Used to identify the role of instrument party id

1484	ComplexEventType	@Typ	Identifies the type of complex event. Required if NoComplexEvents > 0.
1485	ComplexOptPayoutAmount	@OptPayAmt
1486	ComplexEventPrice	@Px
1487	ComplexEventPriceBoundaryMethod	@PxBndryMeth
1488	ComplexEventPriceBoundaryPrecision	@PxBndryPrcsn
1489	ComplexEventPriceTimeType	@PxTmTyp
1490	ComplexEventCondition	@Cond	ComplexEventCondition is conditionally required when there are more than one ComplexEvent occurrences. A chain of ComplexEvents must be linked together through use of the ComplexEventCondition in which the relationship between any two events is described. For any two ComplexEvents the first occurrence will specify the ComplexEventCondition which links it with the second event.

	1492	ComplexEventStartDate	@StartDt		Required if NoComplexEventDates(1491) > 0.
	1493	ComplexEventEndDate	@EndDt		Required if NoComplexEventDates(1491) > 0.

	1495	ComplexEventStartTime	@StartTm		Required if NoComplexEventTimes(1494) > 0.
	1496	ComplexEventEndTime	@EndTm		Required if NoComplexEventTimes(1494) > 0.

311	UnderlyingSymbol	@Sym
312	UnderlyingSymbolSfx	@Sfx
309	UnderlyingSecurityID	@ID
305	UnderlyingSecurityIDSource	@Src

	458	UnderlyingSecurityAltID	@AltID
	459	UnderlyingSecurityAltIDSource	@AltIDSrc

462	UnderlyingProduct	@Prod
463	UnderlyingCFICode	@CFI
310	UnderlyingSecurityType	@SecTyp
763	UnderlyingSecuritySubType	@SubTyp
313	UnderlyingMaturityMonthYear	@MMY
542	UnderlyingMaturityDate	@Mat
1213	UnderlyingMaturityTime	@MatTm
241	UnderlyingCouponPaymentDate	@CpnPmt
1453	UnderlyingRestructuringType	@RestrctTyp
1454	UnderlyingSeniority	@Snrty
1455	UnderlyingNotionalPercentageOutstanding	@NotlPctOut
1456	UnderlyingOriginalNotionalPercentageOutstanding	@OrigNotlPctOut
1459	UnderlyingAttachmentPoint	@AttchPnt
1460	UnderlyingDetachmentPoint	@DetchPnt
242	UnderlyingIssueDate	@Issued
243	UnderlyingRepoCollateralSecurityType	@RepoCollSecTyp		Depr FIX.4.4
244	UnderlyingRepurchaseTerm	@RepoTrm		Depr FIX.4.4
245	UnderlyingRepurchaseRate	@RepoRt		Depr FIX.4.4
246	UnderlyingFactor	@Fctr
256	UnderlyingCreditRating	@CrdRtg
595	UnderlyingInstrRegistry	@Rgstry
592	UnderlyingCountryOfIssue	@Ctry
593	UnderlyingStateOrProvinceOfIssue	@StOrProvnc
594	UnderlyingLocaleOfIssue	@Lcl
247	UnderlyingRedemptionDate	@Redeem		Depr FIX.4.4
316	UnderlyingStrikePrice	@StrkPx
941	UnderlyingStrikeCurrency	@StrkCcy
317	UnderlyingOptAttribute	@OptA
436	UnderlyingContractMultiplier	@Mult
1437	UnderlyingContractMultiplierUnit	@MultTyp
1441	UnderlyingFlowScheduleType	@FlowSchedTyp
998	UnderlyingUnitOfMeasure	@UOM
1423	UnderlyingUnitOfMeasureQty	@UOMQty
1424	UnderlyingPriceUnitOfMeasure	@PxUOM
1425	UnderlyingPriceUnitOfMeasureQty	@PxUOMQty
1000	UnderlyingTimeUnit	@TmUnit	Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)
1419	UnderlyingExerciseStyle	@ExerStyle
435	UnderlyingCouponRate	@CpnRt
308	UnderlyingSecurityExchange	@Exch
306	UnderlyingIssuer	@Issr
362	EncodedUnderlyingIssuerLen	@EncUndIssrLen
363	EncodedUnderlyingIssuer	@EncUndIssr
307	UnderlyingSecurityDesc	@Desc
364	EncodedUnderlyingSecurityDescLen	@EncUndSecDescLen
365	EncodedUnderlyingSecurityDesc	@EncUndSecDesc
877	UnderlyingCPProgram	@CPPgm
878	UnderlyingCPRegType	@CPRegTyp
972	UnderlyingAllocationPercent	@AllocPct	Specific to the < UnderlyingInstrument > Percent of the Strike Price that this underlying represents. Necessary for derivatives that deliver into more than one underlying instrument.
318	UnderlyingCurrency	@Ccy	Specific to the <UnderlyingInstrument> (not in <Instrument>)
879	UnderlyingQty	@Qty	Specific to the <UnderlyingInstrument> (not in <Instrument>) Unit amount of the underlying security (par, shares, currency, etc.)
975	UnderlyingSettlementType	@SettlTyp	Specific to the < UnderlyingInstrument > Indicates order settlement period for the underlying deliverable component.
973	UnderlyingCashAmount	@CashAmt	Specific to the < UnderlyingInstrument > Cash amount associated with the underlying component. Necessary for derivatives that deliver into more than one underlying instrument and one of the underlying's is a fixed cash value.
974	UnderlyingCashType	@CashTyp	Specific to the < UnderlyingInstrument > Used for derivatives that deliver into cash underlying. Indicates that the cash is either fixed or difference value (difference between strike and current underlying price)
810	UnderlyingPx	@Px	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal clean price (percent-of-par or per unit) of the underlying security or basket.
882	UnderlyingDirtyPrice	@DirtPx	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket. "Dirty" means it includes accrued interest
883	UnderlyingEndPrice	@EndPx	Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket at the end of the agreement.
884	UnderlyingStartValue	@StartVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the start of the agreement
885	UnderlyingCurrentValue	@CurVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value currently attributed to this collateral
886	UnderlyingEndValue	@EndVal	Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the end of the agreement

	888	UnderlyingStipType	@Typ		Required if NoUnderlyingStips >0
	889	UnderlyingStipValue	@Val

1044	UnderlyingAdjustedQuantity	@AdjQty	Specific to the <UnderlyingInstrument> (not in <Instrument>). For listed derivatives margin management, this is the number of shares adjusted for upcoming corporate action. Used only for securities which are optionable and are between ex-date and settlement date (4 days).
1045	UnderlyingFXRate	@FxRate	Specific to the <UnderlyingInstrument> (not in <Instrument>). Foreign exchange rate used to compute UnderlyingCurrentValue (885) (or market value) from UnderlyingCurrency (318) to Currency (15).
1046	UnderlyingFXRateCalc	@FxRateCalc	Specific to the <UnderlyingInstrument> (not in <Instrument>). Specified whether UnderlyingFxRate (1045) should be multiplied or divided to derive UnderlyingCurrentValue (885).
1038	UnderlyingCapValue	@CapValu

1059	UnderlyingInstrumentPartyID	@ID	Used to identify party id related to instrument
1060	UnderlyingInstrumentPartyIDSource	@Src	Used to identify source of instrument party id
1061	UnderlyingInstrumentPartyRole	@R	Used to identify the role of instrument party id

	1063	UnderlyingInstrumentPartySubID	@ID
	1064	UnderlyingInstrumentPartySubIDType	@Typ

	1039	UnderlyingSettlMethod	@SetMeth
	315	UnderlyingPutOrCall	@PutCall		Used to express option right

600	LegSymbol	@Sym
601	LegSymbolSfx	@Sfx
602	LegSecurityID	@ID
603	LegSecurityIDSource	@Src

	605	LegSecurityAltID	@SecAltID
	606	LegSecurityAltIDSource	@SecAltIDSrc

607	LegProduct	@Prod
608	LegCFICode	@CFI
609	LegSecurityType	@SecTyp
764	LegSecuritySubType	@SecSubTyp
610	LegMaturityMonthYear	@MMY
611	LegMaturityDate	@Mat
1212	LegMaturityTime	@MatTm
248	LegCouponPaymentDate	@CpnPmt
249	LegIssueDate	@Issued
250	LegRepoCollateralSecurityType	@RepoCollSecTyp		Depr FIX.4.4
251	LegRepurchaseTerm	@RepoTrm		Depr FIX.4.4
252	LegRepurchaseRate	@RepoRt		Depr FIX.4.4
253	LegFactor	@Fctr
257	LegCreditRating	@CrdRtg
599	LegInstrRegistry	@Rgstry
596	LegCountryOfIssue	@Ctry
597	LegStateOrProvinceOfIssue	@StOrProvnc
598	LegLocaleOfIssue	@Lcl
254	LegRedemptionDate	@Redeem		Depr FIX.4.4
612	LegStrikePrice	@Strk
942	LegStrikeCurrency	@StrkCcy
613	LegOptAttribute	@OptA
614	LegContractMultiplier	@Cmult
1436	LegContractMultiplierUnit	@MultTyp
1440	LegFlowScheduleType	@FlowSchedTyp
999	LegUnitOfMeasure	@UOM
1224	LegUnitOfMeasureQty	@UOMQty
1421	LegPriceUnitOfMeasure	@PxUOM
1422	LegPriceUnitOfMeasureQty	@PxUOMQty
1001	LegTimeUnit	@TmUnit	Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)
1420	LegExerciseStyle	@ExerStyle
615	LegCouponRate	@CpnRt
616	LegSecurityExchange	@Exch
617	LegIssuer	@Issr
618	EncodedLegIssuerLen	@EncLegIssrLen
619	EncodedLegIssuer	@EncLegIssr
620	LegSecurityDesc	@Desc
621	EncodedLegSecurityDescLen	@EncLegSecDescLen
622	EncodedLegSecurityDesc	@EncLegSecDesc
623	LegRatioQty	@RatioQty	Specific to the <InstrumentLeg> (not in <Instrument>)
624	LegSide	@Side	Specific to the <InstrumentLeg> (not in <Instrument>)
556	LegCurrency	@Ccy	Specific to the <InstrumentLeg> (not in <Instrument>)
740	LegPool	@Pool	Identifies MBS / ABS pool
739	LegDatedDate	@Dated
955	LegContractSettlMonth	@CSetMo
956	LegInterestAccrualDate	@IntAcrl
1358	LegPutOrCall	@PutCall	Used to express option right
1017	LegOptionRatio	@LegOptionRatio	LegOptionRatio is provided on covering leg to create a delta neutral spread. In Listed Derivatives, the delta of the leg is multiplied by LegOptionRatio and OrderQty to determine the covering quantity.
566	LegPrice	@Px	Used to specify an anchor price for a leg as part of the definition or creation of the strategy - not used for execution price.

53	Quantity	@Qty	Total quantity (e.g. number of shares) allocated to all accounts, or that is Ready-To-Book
854	QtyType	@QtyTyp
30	LastMkt	@LastMkt	Market of the executions.
229	TradeOriginationDate	@OrignDt
336	TradingSessionID	@SesID
625	TradingSessionSubID	@SesSub
423	PriceType	@PxTyp
6	AvgPx	@AvgPx	For FX orders, should be the "all-in" rate (spot rate adjusted for forward points), expressed in terms of Currency(15).
860	AvgParPx	@AvgParPx

	15	Currency	@Ccy		Currency of AvgPx. Should be the currency of the local market or exchange where the trade was conducted.
	74	AvgPxPrecision	@AvgPxPrcsn		Absence of this field indicates that default precision arranged by the broker/institution is to be used

75	TradeDate	@TrdDt
60	TransactTime	@TxnTm	Date/time when allocation is generated
63	SettlType	@SettlTyp
64	SettlDate	@SettlDt	Takes precedence over SettlType value and conditionally required/omitted for specific SettlType values. Required for NDFs to specify the "value date".
775	BookingType	@BkngTyp	Method for booking. Used to provide notification that this is to be booked out as an OTC derivative (e.g. CFD or similar). Absence of this field implies regular booking.
381	GrossTradeAmt	@GrossTrdAmt	Expressed in same currency as AvgPx(6). (Quantity(53) * AvgPx(6) or AvgParPx(860)) or sum of (AllocQty(80) * AllocAvgPx(153) or AllocPrice(366)). For Fixed Income, AvgParPx(860) is used when AvgPx(6) is not expressed as "percent of par" price.
238	Concession	@Concession
237	TotalTakedown	@TotTakedown
118	NetMoney	@NetMny	Expressed in same currency as AvgPx. Sum of AllocNetMoney. For FX expressed in terms of Currency(15).
77	PositionEffect	@PosEfct
754	AutoAcceptIndicator	@AutoAcceptInd	Indicates if Allocation has been automatically accepted on behalf of the Carry Firm by the Clearing House
58	Text	@Txt
354	EncodedTextLen	@EncTxtLen	Must be set if EncodedText field is specified and must immediately precede it.
355	EncodedText	@EncTxt	Encoded (non-ASCII characters) representation of the Text field in the encoded format specified via the MessageEncoding field.
157	NumDaysInterest	@NumDaysInt	Applicable for Convertible Bonds and fixed income
158	AccruedInterestRate	@AcrdIntRt	Applicable for Convertible Bonds and fixed income
159	AccruedInterestAmt	@AcrdIntAmt	Sum of AllocAccruedInterestAmt within repeating group.
540	TotalAccruedInterestAmt	@TotAcrdIntAmt		Depr FIX.4.4
738	InterestAtMaturity	@IntAtMat
920	EndAccruedInterestAmt	@EndAcrdIntAmt	For repurchase agreements the accrued interest on termination.
921	StartCash	@StartCsh	For repurchase agreements the start (dirty) cash consideration
922	EndCash	@EndCsh	For repurchase agreements the end (dirty) cash consideration
650	LegalConfirm	@LegalCnfm

524	NestedPartyID	@ID	Used to identify source of NestedPartyID. Required if NestedPartyIDSource is specified. Required if NoNestedPartyIDs > 0.
525	NestedPartyIDSource	@Src	Used to identify class source of NestedPartyID value (e.g. BIC). Required if NestedPartyID is specified. Required if NoNestedPartyIDs > 0.
538	NestedPartyRole	@R	Identifies the type of NestedPartyID (e.g. Executing Broker). Required if NoNestedPartyIDs > 0.

12	Commission	@Comm
13	CommType	@CommTyp
479	CommCurrency	@Ccy
497	FundRenewWaiv	@FundRenewWaiv

137	MiscFeeAmt	@Amt	Required if NoMiscFees > 0
138	MiscFeeCurr	@Curr
139	MiscFeeType	@Typ	Required if NoMiscFees > 0
891	MiscFeeBasis	@Basis

172	SettlDeliveryType	@DlvryTyp	Required if AllocSettlInstType = 1 or 2
169	StandInstDbType	@StandInstDbTyp	Required if AllocSettlInstType = 3 (should not be populated otherwise)
170	StandInstDbName	@StandInstDbName	Required if AllocSettlInstType = 3 (should not be populated otherwise)
171	StandInstDbID	@StandInstDbID	Identifier used within the StandInstDbType Required if AllocSettlInstType = 3 (should not be populated otherwise)

782	SettlPartyID	@ID	Used to identify source of SettlPartyID. Required if SettlPartyIDSource is specified. Required if NoSettlPartyIDs > 0.
783	SettlPartyIDSource	@Src	Used to identify class source of SettlPartyID value (e.g. BIC). Required if SettlPartyID is specified. Required if NoSettlPartyIDs > 0.
784	SettlPartyRole	@R	Identifies the type of SettlPartyID (e.g. Executing Broker). Required if NoSettlPartyIDs > 0.