TestSuiteDefinitionRequest(35=EL) is used to convey to the test system the suite of test scenarios to perform.
This message stages on the test system the details of a test suite to run to test the algo. The test suite contains one or more test scenarios (i.e. test cases) along with the details for each test scenario.
Pedigree Added EP292
Expand Components | Collapse Components
| Field or Component | Field Name | Abbr Name | Req'd | Comments | Pedigree |
|---|
| Component(-) | StandardHeader | Hdr | Y | MsgType = EL | Added EP292 |
| 8 | BeginString | BeginString | Y | FIXT.1.1 (Always unencrypted, must be first field in message) | Added FIX.4.0 |
| 9 | BodyLength | BodyLength | Y | (Always unencrypted, must be second field in message) | Added FIX.4.0 |
| 35 | MsgType | MsgTyp | Y | (Always unencrypted, must be third field in message) | Added FIX.4.0 |
| 1128 | ApplVerID | ApplVerID | Indicates application version using a service pack identifier. The ApplVerID applies to a specific message occurrence. | Added EP-1 | |
| 1156 | ApplExtID | ApplExtID | Added EP-1 | ||
| 1129 | CstmApplVerID | CstmApplVerID | Used to support bilaterally agreed custom functionality | Added EP-1 | |
| 49 | SenderCompID | SID | Y | (Always unencrypted) | Added FIX.4.0 |
| 56 | TargetCompID | TID | Y | (Always unencrypted) | Added FIX.4.0 |
| 115 | OnBehalfOfCompID | OBID | Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 128 | DeliverToCompID | D2ID | Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 90 | SecureDataLen | SecureDataLen | Required to identify length of encrypted section of message. (Always unencrypted) | Added FIX.4.0 Updated EP195 Deprecated EP195 | |
| 91 | SecureData | SecureData | Required when message body is encrypted. Always immediately follows SecureDataLen field. | Added FIX.4.0 Updated EP195 Deprecated EP195 | |
| 34 | MsgSeqNum | SeqNum | Y | (Can be embedded within encrypted data section.) | Added FIX.4.0 |
| 50 | SenderSubID | SSub | (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 142 | SenderLocationID | SLoc | Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.) | Added FIX.4.1 | |
| 57 | TargetSubID | TSub | ADMINreserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 143 | TargetLocationID | TLoc | Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.) | Added FIX.4.1 | |
| 116 | OnBehalfOfSubID | OBSub | Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 144 | OnBehalfOfLocationID | OBLoc | Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.) | Added FIX.4.1 | |
| 129 | DeliverToSubID | D2Sub | Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 145 | DeliverToLocationID | D2Loc | Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.) | Added FIX.4.1 | |
| 43 | PossDupFlag | PosDup | Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 97 | PossResend | PosRsnd | Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 52 | SendingTime | Snt | Y | (Can be embedded within encrypted data section.) | Added FIX.4.0 |
| 122 | OrigSendingTime | OrigSnt | Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.) | Added FIX.4.0 | |
| 212 | XmlDataLen | XmlDataLen | Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.) | Added FIX.4.2 | |
| 213 | XmlData | XmlData | Can contain a XML formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Volume 1: FIXML Support | Added FIX.4.2 | |
| 347 | MessageEncoding | MsgEncd | Type of message encoding (non-ASCII characters) used in a message's Encodedfields. Required if any Encodingfields are used. | Added FIX.4.2 | |
| 369 | LastMsgSeqNumProcessed | LastMsgSeqNumProced | The last MsgSeqNum value received by the FIX engine and processed by downstream application, such as trading system or order routing system. Can be specified on every message sent. Useful for detecting a backlog with a counterparty. | Added FIX.4.2 | |
| Component(-) | HopGrp | Hop | Number of repeating groups of historical hopinformation. Only applicable if OnBehalfOfCompID is used, however, its use is optional. Note that some market regulations or counterparties may require tracking of message hops. | Added EP-1 |
| Repeating Group 627 | NoHops | Added EP-1 |
| 628 | HopCompID | ID | Added EP-1 | ||
| 629 | HopSendingTime | Snt | Added EP-1 | ||
| 630 | HopRefID | Ref | Added EP-1 |
| end Repeating Group |
| end Component |
| end Component |
| 3062 | TestSuiteRequestID | TstSteReqID | Y | Unique identifier assigned by request initiator. | Added EP292 |
| 3064 | TestSuiteRequestTransType | TxnTyp | Y | Added EP292 | |
| 3063 | TestSuiteRequestRefID | TstSteReqRefID | Required for TestSuiteRequestTransType(3064)=1 (Cancel). | Added EP292 | |
| Component(-) | Parties | Pty | May be used to specify the algorithm related to the test suite. | Added EP292 Updated EP303 |
| Repeating Group 453 | NoPartyIDs | Repeating group below should contain unique combinations of PartyID, PartyIDSource, and PartyRole | Added FIX.4.3 |
| 448 | PartyID | ID | Required if NoPartyIDs(453) > 0. Identification of the party. | Added FIX.4.3 Updated EP204 | |
| 447 | PartyIDSource | Src | Required if NoPartyIDs(453) > 0. Used to identify classification source. | Added FIX.4.3 Updated EP204 | |
| 452 | PartyRole | R | Required if NoPartyIDs(453) > 0. Identifies the type of PartyID(448). | Added FIX.4.3 Updated EP204 | |
| 2376 | PartyRoleQualifier | Qual | Added EP179 | ||
| Component(-) | PtysSubGrp | Sub | Repeating group of Party sub-identifiers. | Added FIX.4.4 |
| Repeating Group 802 | NoPartySubIDs | Added FIX.4.4 |
| 523 | PartySubID | ID | Added FIX.4.4 | ||
| 803 | PartySubIDType | Typ | Added FIX.4.4 |
| end Repeating Group |
| end Component |
| end Repeating Group |
| end Component |
| Component(-) | TestSuiteParameterGrp | TstStePrm | May be used to define test system parameters at the test suite level. | Added EP303 |
| Repeating Group 3126 | NoTestSuiteParameters | Added EP303 |
| 3127 | TestSuiteParameterName | PrmName | Required if NoTestSuiteParameters(3126) > 0. | Added EP303 | |
| 3128 | TestSuiteParameterType | PrmTyp | Required if NoTestSuiteParameters(3126) > 0. | Added EP303 | |
| 3129 | TestSuiteParameterValue | PrmVal | Required if NoTestSuiteParameters(3126) > 0. | Added EP303 |
| end Repeating Group |
| end Component |
| Component(-) | StrategyParametersGrp | StrtPrmGrp | May be used to define parameters for the algorithm being tested. | Added EP292 Updated EP303 |
| Repeating Group 957 | NoStrategyParameters | Indicates number of strategy parameters | Added EP-1 |
| 958 | StrategyParameterName | StrtPrmNme | Name of parameter | Added EP-1 | |
| 959 | StrategyParameterType | StrtPrmTyp | Datatype of the parameter. | Added EP-1 | |
| 960 | StrategyParameterValue | StrtPrmVal | Value of the parameter | Added EP-1 |
| end Repeating Group |
| end Component |
| Component(-) | AlgoSystemModuleGrp | AlgoSysModl | May be used with test suites related to the testing of algorithms. | Added EP292 |
| Repeating Group 3025 | NoAlgoSystemModules | Added EP292 |
| 3026 | AlgoSystemModuleName | Name | Required if NoAlgoSystemModules(3025)>0. | Added EP292 | |
| 3027 | AlgoSystemModuleVersion | Ver | Required if NoAlgoSystemModules(3025)>0. | Added EP292 | |
| 3080 | AlgoSystemModuleLastUpdateTime | LastUpdateTm | Added EP295 |
| end Repeating Group |
| end Component |
| 3079 | TestScenarioGroupID | TstScnroGrpID | May be used to define a shortcut for TestScenarioGrp. The shortcut always references all test scenarios of the test suite. It must not be used to define shortcuts for a subset of test scenarios of a test suite. | Added EP295 | |
| Component(-) | TestScenarioGrp | TstScnro | Y | Added EP292 |
| Repeating Group 3028 | NoTestScenarios | Added EP292 |
| 3029 | TestScenarioID | ID | Required if NoTestScenarios(3028) > 0. | Added EP292 Updated EP303 | |
| 3030 | TestScenarioStatus | Stat | Required if NoTestScenarios(3028) > 0. | Added EP292 Updated EP303 | |
| 3031 | TestScenarioStartTime | StartTm | Overall starting time of this test scenario. | Added EP292 | |
| 3032 | TestScenarioEndTime | EndTm | Overall ending time of this test scenario. | Added EP292 | |
| Component(-) | TestScenarioParameterGrp | TstScnroPrm | May be used to define test system parameters at the scenario level. | Added EP303 |
| Repeating Group 3130 | NoTestScenarioParameters | Added EP303 |
| 3131 | TestScenarioParameterName | PrmName | Required if NoTestScenarioParameters(3130) > 0. | Added EP303 | |
| 3132 | TestScenarioParameterType | PrmTyp | Required if NoTestScenarioParameters(3130) > 0. | Added EP303 | |
| 3133 | TestScenarioParameterValue | PrmVal | Required if NoTestScenarioParameters(3130) > 0. | Added EP303 |
| end Repeating Group |
| end Component |
| Component(-) | NestedParties | Pty | May be used to identify one or more execution venues. | Added EP295 |
| Repeating Group 539 | NoNestedPartyIDs | Repeating group below should contain unique combinations of NestedPartyID, NestedPartyIDSource, and NestedPartyRole | Added FIX.4.3 |
| 524 | NestedPartyID | ID | Used to identify source of NestedPartyID. Required if NestedPartyIDSource is specified. Required if NoNestedPartyIDs > 0. | Added FIX.4.3 | |
| 525 | NestedPartyIDSource | Src | Used to identify class source of NestedPartyID value (e.g. BIC). Required if NestedPartyID is specified. Required if NoNestedPartyIDs > 0. | Added FIX.4.3 | |
| 538 | NestedPartyRole | R | Identifies the type of NestedPartyID (e.g. Executing Broker). Required if NoNestedPartyIDs > 0. | Added FIX.4.3 | |
| 2384 | NestedPartyRoleQualifier | Qual | Added EP179 | ||
| Component(-) | NstdPtysSubGrp | Sub | Repeating group of NestedParty sub-identifiers. | Added FIX.4.4 |
| Repeating Group 804 | NoNestedPartySubIDs | Added FIX.4.4 |
| 545 | NestedPartySubID | ID | Added FIX.4.4 | ||
| 805 | NestedPartySubIDType | Typ | Added FIX.4.4 |
| end Repeating Group |
| end Component |
| end Repeating Group |
| end Component |
| Component(-) | InstrumentScopeGrp | InstrmtScope | InstrumentScopeSecurityGroup(1545) may be used to reference a list of securities provided with the SecurityList(35=y) message. | Added EP292 |
| Repeating Group 1656 | NoInstrumentScopes | Added EP105 |
| 1535 | InstrumentScopeOperator | Oper | Required when NoInstrumentScopes > 0. | Added EP105 |
| Component(-) | InstrumentScope | InstrmtScope | Added EP105 |
| 1536 | InstrumentScopeSymbol | Sym | Added EP105 | ||
| 1537 | InstrumentScopeSymbolSfx | Sfx | Added EP105 | ||
| 1538 | InstrumentScopeSecurityID | ID | Added EP105 | ||
| 1539 | InstrumentScopeSecurityIDSource | Src | Added EP105 | ||
| Component(-) | InstrumentScopeSecurityAltIDGrp | AID | Added EP105 |
| Repeating Group 1540 | NoInstrumentScopeSecurityAltID | Added EP105 |
| 1541 | InstrumentScopeSecurityAltID | AltID | Required when NoInstrumentScopeSecurityAltID > 0. | Added EP105 | |
| 1542 | InstrumentScopeSecurityAltIDSource | AltIDSrc | Required when NoInstrumentScopeSecurityAltID > 0. | Added EP105 |
| end Repeating Group |
| end Component |
| end Component |
| end Repeating Group |
| end Component |
| 1024 | MDOriginType | MDOrigTyp | Added EP292 | ||
| 3033 | MDOriginDesc | MDOrigDesc | Added EP292 | ||
| 3034 | MDOriginTime | MDOrigTm | Added EP292 | ||
| 3035 | TestStepGroupID | TstStepGrpID | May be used to define a shortcut for TestStepGrp. | Added EP292 Updated EP295 | |
| Component(-) | TestStepGrp | TstStep | Added EP292 |
| Repeating Group 3036 | NoTestSteps | Added EP292 |
| 3037 | TestStepID | ID | Required if NoTestSteps(3036) > 0. | Added EP292 Updated EP303 | |
| 3038 | TestStepDesc | Desc | Added EP292 | ||
| 3039 | TestStepStartTime | StartTm | Use for an absolute starting time. Mutually exclusive with TestStepStartOffsetUnit(3041) and TestStepStartOffsetPeriod(3040). | Added EP292 | |
| 3040 | TestStepStartOffsetPeriod | StartOfstPeriod | Use for a starting time relative to the overall starting time defined by TestScenarioStartTime(3031). Required when TestStepStartOffsetUnit(3041) is specified. | Added EP292 | |
| 3041 | TestStepStartOffsetUnit | StartOfstUnit | Use for a starting time relative to the overall starting time defined by TestScenarioStartTime(3031). Required when TestStepStartOffsetPeriod(3040) is specified. | Added EP292 | |
| 3042 | TestStepEndTime | EndTm | Use for an absolute ending time. Mutually exclusive with TestStepEndOffsetUnit(3044) and TestStepEndOffsetPeriod(3043). | Added EP292 | |
| 3043 | TestStepEndOffsetPeriod | EndOfstPeriod | Use for an ending time relative to the starting time of the step defined by TestStepStartTime(3039). Required when TestStepEndOffsetUnit(3044) is specified. | Added EP292 | |
| 3044 | TestStepEndOffsetUnit | EndOfstUnit | Use for an ending time relative to the starting time of the step defined by TestStepStartTime(3039). Required when TestStepEndOffsetPeriod(3043) is specified. | Added EP292 |
| Component(-) | TestStepParameterGrp | TstStepPrm | May be used to define test system parameters at the step level. | Added EP292 Updated EP303 |
| Repeating Group 3045 | NoTestStepParameters | Added EP292 |
| 3046 | TestStepParameterName | PrmName | Required if NoTestStepParameters(3045)>0. | Added EP292 | |
| 3047 | TestStepParameterType | PrmTyp | Required if NoTestStepParameters(3045)>0. | Added EP292 | |
| 3048 | TestStepParameterValue | PrmVal | Required if NoTestStepParameters(3045)>0. | Added EP292 |
| end Repeating Group |
| end Component |
| end Repeating Group |
| end Component |
| Component(-) | TestSystemModuleGrp | TstSysModl | Added EP292 |
| Repeating Group 3049 | NoTestSystemModules | Added EP292 |
| 3050 | TestSystemModuleName | Name | Required if NoTestSystemModules (3049)>0. | Added EP292 | |
| 3051 | TestSystemModuleVersion | Ver | Required if NoTestSystemModules (3049)>0. | Added EP292 | |
| 3081 | TestSystemModuleLastUpdateTime | LastUpdateTm | Added EP295 |
| end Repeating Group |
| end Component |
| Component(-) | TestMeasureGrp | TstMsr | Use to provide the metrics and thresholds for the scenario identified by TestScenarioID(3029). Required unless TestSuiteStatus(3070)=0 (Undefined). | Added EP292 |
| Repeating Group 3052 | NoTestMeasures | Added EP292 |
| 3053 | TestMeasureName | Name | Required if NoTestMeasures(3052)>0. | Added EP292 | |
| 3054 | TestMeasureDesc | Desc | Added EP292 | ||
| 3055 | TestMeasureType | Typ | Required if NoTestMeasures(3052)>0. | Added EP292 | |
| 3056 | TestMeasurePrecision | Prcsn | Added EP292 | ||
| 3057 | TestMeasureResult | Rslt | Required if NoTestMeasures(3052)>0. | Added EP292 | |
| 3058 | TestThresholdType | ThresholdTyp | Required if NoTestMeasures(3052)>0. | Added EP292 | |
| 3059 | TestWarningLevelValue | WarnLvlVal | Added EP292 | ||
| 3060 | TestFailLevelValue | FailLvlVal | Required if NoTestMeasures(3052)>0. | Added EP292 | |
| 3061 | TestPeakLevelValue | PeakLvlVal | Added EP292 |
| end Repeating Group |
| end Component |
| Component(-) | TestOrderGrp | TstOrd | Use to provide a list of orders to be used for testing the scenario. | Added EP295 |
| Repeating Group 3082 | NoTestOrders | Added EP295 |
| 3083 | TestOrderID | ID | Required if NoTestOrders(3082)>0. | Added EP295 | |
| 3084 | TestOrderSymbol | Sym | Added EP295 | ||
| 3085 | TestOrderSecurityID | SecID | Added EP295 | ||
| 3086 | TestOrderSecurityIDSource | SecIDSrc | Added EP295 | ||
| 3087 | TestOrderPrice | Px | Added EP295 | ||
| 3088 | TestOrderPriceType | PxTyp | Added EP295 | ||
| 3089 | TestOrderQty | Qty | Added EP295 | ||
| 3090 | TestOrderOffsetPeriod | OfstPeriod | Use for an effective time relative to the overall starting time defined by TestScenarioStartTime(3031). Required when TestOrderOffsetUnit(3091) is specified. | Added EP295 | |
| 3091 | TestOrderOffsetUnit | OfstUnit | Use for an effective time relative to the overall starting time defined by TestScenarioStartTime(3031). Required when TestOrderOffsetPeriod(3090) is specified. | Added EP295 |
| end Repeating Group |
| end Component |
| end Repeating Group |
| end Component |
| 60 | TransactTime | TxnTm | Y | Added EP292 | |
| 58 | Text | Txt | Added EP292 | ||
| 354 | EncodedTextLen | EncTxtLen | Must be set if EncodedText(355) field is specified and must immediately precede it. | Added EP292 | |
| 355 | EncodedText | EncTxt | Encoded (non-ASCII characters) representation of the Text(58) field in the encoded format specified via the MessageEncoding(347) field. | Added EP292 |
| Component(-) | StandardTrailer | Trlr | Y | Added EP292 |
| 93 | SignatureLength | SignatureLength | Required when trailer contains signature. Note: Not to be included within SecureData field | Added FIX.4.0 Updated EP195 Deprecated EP195 | |
| 89 | Signature | Signature | Note: Not to be included within SecureData field | Added FIX.4.0 Updated EP195 Deprecated EP195 | |
| 10 | CheckSum | CheckSum | Y | (Always unencrypted, always last field in message) | Added FIX.4.0 |
| end Component |
|